Monitoring vibration, bearing condition & temperature

Monitoring equipment connected to a PLC

Alternative 1:
1 velocity transducer (VT16.13) + 2 converter (VA 43T) + 1 standard PT100 3-wire converter.(PT100).

In alternative 1 accelerometers can be used.

Alternative 2:
1 multi accelerometer with a built-in converter(AT19C Multi)
The multi accelerometer has the outputs vibration, bearing condition and temperature.
Output 1 and 2: 0-10 V DC
Output 3: 100 mV/g AC
Output 4: 10 mV/°C

VT16.13

VA 43 T

AT19C

Advantages of using velocity transducer + converter

  • Insensitive to interference
  • It is easy to switch measurement range
  • Increased possibilities to filter the signal

Advantages of using an accelerometer with a built-in converter

  • Lower investment cost

Monitoring equipment as separate units

1 velocity transducer (VT16.13) + 2 converter with a relay (VA 43S) + 1 standard PT100 3-wire converter.(PT100).

VT16.13

VA 43 S

Comments are closed.